Monuments in Germany
A guide to 544 Monuments in Germany — with descriptions, photos and traveler visits from the NextOnTrip community. Locations spread across 480 cities and towns. Most visited by the community: Burg Sachsenstein, Hohenneuffen Castle, Herrenhaus Divitz.
-
Kleines Schäferrad
Möhrendorf
Kleines Schäferrad is one of the ten scoop wheels of Möhrendorf, standing on the Regnitz river in Upper Franconia. Its name translates roughly as the "Little Shepherd's Wheel". It belongs to a group of technical monuments described as unique, and it makes a pleasant short destination for a bike ride or walk if you enjoy industrial heritage and quiet riverside scenery. What is a scoop wheel? A water scoop wheel (German: Wasserschöpfrad) is a wooden structure set in the current of a river. The flow turns it, and buckets fixed around its rim lift part of the water and tip it into a channel. That way the water reaches fields and meadows lying higher than the river itself. This approach served for centuries to irrigate the Regnitz valley. The ten Möhrendorf wheels are counted among the last of their kind in central Europe and are called a one-of-a-kind cultural monument. Wikimedia Commons gives an early 15th-century date for them, though that is only a general indication of their origins. Who looks after the wheel? The patronage of the Kleines Schäferrad is held by the "Wasserradstammtisch" regulars' group of the local association Verein Zufriedenheit Oberndorf. Since 1985 its members have voluntarily put the wheel up for the season and taken it down again afterwards. The association has maintained it for more than fifteen years as the third wheel in its care. Sources also give an alternative name, "Oberdorfer Rad". How to find it The wheel lies on the Regnitz near Möhrendorf, at about 49.629 N, 11.007 E. You reach it along the southern loop of the wheel trail, which can be started in the centre of Möhrendorf or in neighbouring Bubenreuth. According to a route description, you turn left after a barn towards the river, where a group of benches by the wheel offers a place to rest. Frequently asked questions How many scoop wheels are there in Möhrendorf? Ten stand on the Regnitz. Sources differ on how many actually lift water; eight is the figure most often mentioned, so check the current situation before you travel. Who maintains the Kleines Schäferrad? The association Verein Zufriedenheit Oberndorf, through members who work on a voluntary basis. Is it a good spot for cycling? Yes, the area is described as a destination for cycling routes along the Regnitz, including a regional themed tour featuring the water wheels. Is the wheel in operation all year? Volunteers assemble and dismantle the wheel, so it is not necessarily in the water all year. For current information, see regnitzraeder.de, named as the municipality's main information site.
-
Holländer-Windmühle Bederkesa
Geestland
Holländer-Windmühle Bederkesa is a historic Dutch-style windmill that has stood above the town of Bad Bederkesa, in the municipality of Geestland in northern Lower Saxony, since 1881. It occupies a ridge of the geest about 31 metres above the settlement, so it is visible from far around. Today it works as a technical monument and viewpoint rather than a commercial mill. What is the history of the Bederkesa windmill? Mills stood on this spot long before the present building. Sixteenth-century Bremen records mention a horse mill and a post windmill, though nobody knows when either was built. For centuries the mill belonged to the Bederkesa lordship and was leased out. Millers' names are known from 1677, and the Volckmann family leased it for over a hundred years. In 1881 the post mill burned down after a lightning strike. The same year the owner, Hinrich Reysen, built the current Dutch-style mill with its wind rose on the site. In 1927 an engine was fitted to drive the millstones, and in 1960 an electric hammer mill and flour mixer followed. Miller Adolf Vick leased the mill from 1956 until his death in 1987. In 1968 the Bederkesa municipality bought the land and buildings from the Koröde family. Since 1990 the local beautification society (Verschönerungsverein) has looked after the monument, and in 2020 it underwent a full renovation. What type of mill is it? It is an Erd- und Galerieholländer: an octagonal Dutch mill with a gallery running around it, used for operating the sails. The rotating cap, shaped like an upturned boat hull, weighs about 20 tonnes with the sails and rests on 24 double rollers. The wind rose turns the cap and sails into the wind automatically. Since 2020 the sails have had louvre shutters; for a time before that they carried a lattice. What is inside? The machinery impresses even non-specialists. The main shaft is roughly 8 metres long and weighs about 1.5 tonnes. The face wheel is 2.70 m across with 72 hornbeam cogs, and the large spur wheel measures 3.70 m with 168 cogs. The sail-shaft bearing is a so-called Katzenstein of Belgian slate, and the upper millstone is French quartz. There are two millstones, one driven by wind and one by electricity. The brake is operated by hand from the gallery with a lever. The interior is split into several floors. The lowest holds sacks, a small shop and working models of Bederkesa's three former mills: horse, post and Dutch. Above are the millstones and mixer, then the shaft, hoists, grain displays and hand mills. Higher floors show a mechanical and electric sack hoist, the curb ring and roller bearings, and the cap holds the stone wheel and brake. You can turn a model millstone by muscle power. Can you climb to the top? Yes, the floors are safely accessible up to the balcony beneath the cap. From there you see the town, the nearby lake and the landscape of the Elbe-Weser region. Check the society's website for opening times and guided-tour arrangements before you visit. Frequently asked questions When was the windmill built? In 1881, after an earlier mill burned down in a lightning strike. Who looks after it? Since 1990, the Verschönerungsverein Bederkesa. Did it keep grinding grain? A miller ran it until 1990; since then it has been a museum monument.
-
Aspermühle
Goch
Aspermühle is a former watermill on the River Niers in Goch, in the Asperden district of the Lower Rhine region. For almost eight centuries millers ground grain here, and today the site recalls a traditional regional craft and makes a quiet stop on a trip around the area. Where is Aspermühle? The mill stands at Triftstraße 264 on the right bank of the Niers, outside the built-up part of Asperden. Meadows of the river valley surround it, and remains of the old millpond can still be seen in the floodplain. They help you picture how the water system worked before the flow reached the wheel. How did the mill work? Aspermühle was a watermill with an undershot wheel. In this design the river flows beneath the wheel and turns it with the force of the current rather than a drop from above. It was a typical arrangement on lowland rivers such as the Niers, where differences in level are small. The mill worked as a grain mill. Later a second water wheel was added to drive an oil press and a saw for timber, so the business served local farmers and craftsmen in several ways. History from the Middle Ages to the 20th century The mill is older than 1301. In that year the Count of Guelders gave the watermill to the Cistercian nuns of nearby Graefenthal Abbey. For centuries it therefore belonged to a religious community, for which it was an important source of income. Around 1800 it passed into private ownership and continued as a family business. A major change came in 1932. The Niers was straightened and the water level dropped, so water power was no longer enough. The mill switched to steam and electric drive. The change shows how river regulation affected traditional milling across the whole valley. A fire in 1959 ended the milling trade at this site. Good to know before you visit The place is part of the Niers valley landscape, which is popular with walkers and cyclists. The site is out of the way, so the best approach is by car or bike from Goch. The former mill is now used for private business, so treat it as something to view from the outside and from the road, not as a classic attraction with set opening hours. A good addition to a visit is a walk along the river, looking for traces of the old millpond in the meadow. Frequently asked questions Where exactly is Aspermühle? At Triftstraße 264 in the Asperden district of Goch, on the River Niers. How old is the mill? The first record dates to 1301, but the building is older than that. When did the mill stop grinding grain? After the Niers was straightened in 1932 the drive changed to steam and electricity, and a fire in 1959 ended the milling tradition of the site. Does the mill still have its water wheel? It had an undershot wheel, but it no longer operates as a working water mill. What remains is the building and traces of the millpond. Is it worth visiting? Yes, if you are interested in old mills, Lower Rhine history and quiet riverside countryside. It is a short stop, best combined with a longer route around Goch.
-
Odilienmühle
Getynga
Odilienmühle is a historic watermill on the western edge of Göttingen's old town, standing on Hospitalstraße beside the Leinekanal, a canal of the River Leine. It is also known as the Kleine Mühle, the "Little Mill". It is one of the oldest industrial sites in the city, and today shows how old infrastructure can find a place in everyday life in Lower Saxony. What is the Odilienmühle and where is it? The mill stands beside a canal that for centuries carried water to Göttingen's workshops and mills. It sits on the fringe of the historic centre, so it fits easily into a stroll through the old town, between period townhouses and the greenery of the former ramparts. Beside the building you can see the mill wheel and the flowing canal, which convey the former character of the place well. What is the history of the mill? The first firm record of the mill dates from 1305. In a charter of Duke Albrecht the Fat, the town received the right to the Mahlmetze, a payment in kind taken when grain was ground. The mill then belonged to the lords of Adelebsen. The origins of the building itself go back to the Middle Ages, and the dates given in the literature range from the twelfth century to around 1300. In 1371 the town of Göttingen bought the mill from its previous owners. From then on it remained municipal property and was leased out to successive millers. At first it stood outside the walls, but after the town expanded and ramparts were built, it was incorporated into the fortifications from 1541. That meant residents still had access to flour during sieges, so the mill served a strategic purpose as well as an economic one. The present building The current building dates from around 1767 and was built together with a modernisation of the milling equipment. Its form is typical of eighteenth-century utilitarian architecture in northern Germany, practical and solid. The mill was grinding grain well into the twentieth century, and part of the operation continued until 1945. In 1999 there was a proposal to turn the building into a centre for the Jewish community. The plan failed because of the high cost of conversion. Today the building houses apartments, restaurants and offices, so it remains a living part of the town rather than a museum behind glass. The mill wheel The mill wheel was restored in 2007 and turns again. It no longer drives the mill's internal machinery, but serves as a memorial and scenic feature. The moving water and the timber structure attract photographers and walkers alike. Frequently asked questions Can I visit the inside of the Odilienmühle? The building is now used for housing, restaurants and offices, so it does not operate as a traditional museum. It is best admired from outside, from the canal side and the street. Why is the mill also called the Kleine Mühle? The name "Little Mill" distinguishes it from other mills along the Leine canal in Göttingen. Odilienmühle is its second, equally common name. How long does a visit take? A few minutes is enough to see the building and the wheel, ideally as part of a longer walk through the western part of the old town. Is the mill close to the centre? Yes, it lies on the western edge of Göttingen's old town and is an easy walk from the main streets of the historic centre.
-
Bockwindmühle Lindennaundorf
Markranstädt
Bockwindmühle Lindennaundorf is a post mill in the Frankenheim-Lindennaundorf district of Markranstädt, just outside Leipzig in Saxony. It is a working, wind-powered piece of technical heritage that, after being rebuilt, became the local focus for celebrating German Mill Day. What is a post mill? The post mill is one of the oldest windmill types in Europe. The whole wooden body, with the milling machinery inside, rests on a single vertical post supported by crossed timber beams. This lets the miller turn the entire building to face the wind by pushing on a long tail pole at the back. The design is simple in principle, but it demands solid carpentry and careful handling, especially when the wind shifts. What is the history of the mill? The original mill was built in 1848 by Carl Friedrich Kanold on the edge of the village of Lindennaundorf. From 1927 it belonged to the Bude family, who kept it until 1975. It was then milled privately until 1990, after which the building gradually lost its function and fell into poor condition. In 2009, members of the local Frankenheim-Lindennaundorf home association dismantled the remains of the historic mill. The windmill was then rebuilt and restored on the village festival meadow. It was officially reopened in 2010 as part of the 17th German Mill Day. Today it is described as fully functional and driven by wind. What can you see and do here? The main event is the German Mill Day (Deutscher Mühlentag), held on Whit Monday. Recent programmes have included tours of the mill, bread and cake baked in a wood-fired oven, cultural entertainment, and exhibitions about milling and the restoration work. It is a good chance to see the wooden mechanism up close and talk to the people who brought it back. Outside open days, the mill is best admired from outside. It stands in open ground, so its silhouette is visible from afar, and the surrounding flat countryside south of Leipzig suits walks and bike rides. The association publishes visiting dates on its website. Getting there and when to go Markranstädt lies southwest of central Leipzig and is easy to reach by car or bicycle. The best time to visit is Mill Day, when the mill is open and a small festival takes place around it. On other days, check the association's announcements first, as the interior is not always open to visitors. Frequently asked questions Is the mill original? The first mill dates from 1848, but it was dismantled in 2009 and rebuilt on the festival meadow. The sources do not say how much of the original structure was reused. Does the mill really work? Yes, it is described as fully functional and wind powered. When can I visit? Mainly during German Mill Day at Pentecost and on dates announced by the local association.
-
Ratsmühle Soltau
Soltau
Ratsmühle Soltau is a former watermill in Soltau, Lower Saxony, standing where the rivers Böhme and Soltau meet. The mill building is a protected monument, and its story reaches back to the Middle Ages. For visitors exploring the town, it is a rewarding stop that shows how water shaped everyday life in old Soltau. What is the Ratsmühle in Soltau? The name comes from "Rat", the town council. For centuries the mill belonged to the town rather than to a private owner. No grain is ground here today, but the surviving building is one of the oldest traces of the town's industrial past. It is listed as a heritage monument, so its shape and historic character are meant to be preserved. What is the history of the mill? The earliest known record of the mill dates from 1384, when it appeared as "nye Mölen", meaning "new mill". It stood at the confluence of the Böhme and the Soltau, where the current could drive the wheels. Until 1817 the mill remained town property. Because of its poor condition it then passed to a private miller. Milling ended in 1963. The building did not fall silent at once, though: until 2004 it served as a sales point for agricultural products. After that it waited for years for a new purpose. What was found at the weir? During work on the weir, wooden palisades were uncovered and dated to 1241. This suggests that people used the water at this spot earlier than the first written mention of the mill. For historians it is a valuable clue to how the settlement by the rivers developed. The fight to save the building Since 2007 an initiative called "Rettet die Ratsmühle" ("Save the Ratsmühle") has campaigned for the building's preservation. Otto Elbers bought the mill in 2022 to protect it from further decay. The building's fate shows how hard it is to maintain industrial heritage once it no longer serves its original function. Why visit? It is one of the oldest documented water-related sites in Soltau. It lies at the meeting point of two rivers, which makes it a pleasant spot for a short walk. You can combine the visit with a stroll through the town centre and nearby sights. The story of its rescue illustrates local commitment to protecting heritage. Frequently asked questions Is the Ratsmühle in Soltau a working mill? No. Milling ended in 1963, and the building is a former watermill. Is the building a listed monument? Yes, the mill is protected as a monument. Where does the name come from? The mill belonged to the town until 1817, and the name refers to the town council. How old is the mill? Sources mention it from at least 1384, and wooden palisades at the weir have been dated to 1241. Can you go inside? How the building is used may change, so check current information with the local tourist office before your visit. You can view the building from outside on a walk along the river.
-
Tüngeda post mill
Tüngeda
Tüngeda post mill (German: Bockwindmühle Tüngeda) is a historic wooden windmill in the Thuringian village of Tüngeda, now part of the municipality of Hörselberg-Hainich in the Wartburgkreis district. It stands on the edge of the village along a track called Wieglebener Weg, and it is one of those rare sights that show how rural milling worked before steam and electricity took over. What is a post mill? The post mill is the oldest windmill type in central Europe. The whole timber body with its machinery rests on a single massive post and can be turned, so the miller can always face the sails into the wind. The Tüngeda mill has sails fitted with louvre-style shutters that regulate how much wind pressure they catch. Few such mills survive in Germany, since many were lost to fire or simply to the wear of weathered timber. A short history For centuries the farmers of Tüngeda had to grind their grain at a mill about five kilometres away in Haina, owned by the von Wangenheim family. This obligation to use that mill is documented from 1575 at the latest. Only in the nineteenth century was a mill of their own approved. It was built around 1840 beside the road from Oesterbehringen to Wangenheim. In 1870 the carpenter Johann Heinrich Rockstuhl bought it, and in 1875 the structure was moved to its present site on Wieglebener Weg. Over the twentieth century the wind was no longer the only source of power, as the mill also drew on an engine and later on electricity. When grinding stopped paying off, the building began to decay. Saved by the villagers The turning point came in 1984. After a severe storm, people in Tüngeda recognised that the crumbling mill was a valuable piece of technical heritage. On 6 April 1984 they founded an interest group to save it, and repairs started in May. The restoration ran until 1987 and gave the mill its shuttered sails. After German reunification the municipality took over the building, and in 1995 a local heritage association was formed. In the summer of 2011 the mill was closed because of structural defects, and conservation work has continued in stages since. It is looked after by the Feuerwehr- und Heimatverein Tüngeda, founded in 2014, which received the Wartburgkreis monument prize in 2025 for preserving and rebuilding the mill. The German Foundation for Monument Protection has backed further work with 9,000 euros, intended among other things for larch-wood cladding and the steps leading up to the entrance. Tips for visiting Tüngeda is a small village, so do not expect extensive tourist facilities. Combine the mill with a wider trip, for example towards the Hörselberge hills or Hainich National Park. Access to the interior depends on the progress of the renovation and on the association, so check current information before you travel. The mill looks best against open fields, and the low light around sunset brings out the timber structure. Frequently asked questions When was the Tüngeda mill built? Around 1840, and it was moved to its present site in 1875. Who looks after it today? The local fire brigade and heritage association, Feuerwehr- und Heimatverein Tüngeda e.V., active since 2014. Is it still a working mill? It is a technical monument being restored in stages. It serves as a reminder of a vanished craft rather than as a production site. What makes it special? It survived because the villagers themselves organised its rescue after the storm of 1984.
-
Wassermühle Oelsitz
Riesa
Wassermühle Oelsitz is a historic water mill in the Oelsitz district of Riesa, Saxony. It stands on the Jahna, a tributary of the Elbe, in the district of Meissen (Landkreis Meißen). The site is a reminder of the milling trade that powered village life in the region for centuries. Where is the mill and how do you get there? Oelsitz is a small locality that belongs to Riesa, an Elbe-side town known regionally for industry and sport. The mill sits in the village right by the Jahna. The easiest way to reach it from central Riesa is by car or bicycle, and the riverside is pleasant for a longer walk. Check opening dates before you go, since the interiors are mostly open during events and heritage open days. What is the history of Wassermühle Oelsitz? Sources disagree about the beginnings. One account names Balthasar Bennewitz as the first known miller, recorded in the Weida parish baptism books in 1589. Local municipal material instead gives 1661 as the year of construction or first documentation. By 1721 the mill belonged to the Jahnishausen manor estate. A fire in 1910 destroyed much of the complex. The mill was rebuilt and equipped with two Francis turbines, then-modern water-driven machines. Electrification began in 1917. After the milling company went insolvent in 1935, Erich Thieme bought the buildings. After 1945 the mill was expropriated and handed to an agricultural production cooperative (LPG), as happened widely in East Germany. Operations stopped in 1992 and the buildings began to decay. What is the mill like today? Since about 2009-2010 the Förderverein Oelsitz e.V., a local support association, has looked after the building with securing and restoration work. The mill now hosts exhibitions, including one on historic weighing technology and another on tools of the rural household. It suits anyone interested in the history of technology and everyday country life in Saxony. Why visit Oelsitz? See a turbine-powered water mill that went from industrial plant to cultural site. Follow the story of rural infrastructure in Saxony, from the 17th century through the GDR era and the years after reunification. Combine the stop with a trip around Riesa, including neighbouring Jahnishausen and its former manor estate. Enjoy a quiet, scenic spot that works well as a cycling break by the Jahna. Frequently asked questions Is the mill still in production? No. Milling ended in 1992, and today the site serves as an exhibition venue and a base for the association. Who looks after the building? The Förderverein Oelsitz e.V., active in preserving the mill since around 2009-2010. What can you see there? Exhibitions on weighing technology and on old household tools, plus the historic mill buildings themselves. Is it open all year? Opening times can be limited, so check with the organisers or the Riesa city website before travelling. Which river is the mill on? The Jahna, a tributary of the Elbe, in the Saxon district of Meissen.
-
Riepenburger Mühle
Hamburg
Riepenburger Mühle "Boreas" is a historic windmill in the Kirchwerder district of Hamburg, described as the oldest and largest surviving grain windmill in the city. It stands at Kirchwerder Mühlendamm 75a, in the Vierlande, the farming belt on the south-eastern edge of the metropolis. What kind of building is it? It is a Dutch-style mill (Holländermühle), where only the cap carrying the sails turns to face the wind. The present building dates from 1828. For a city better known for its port and office blocks, it is a rare reminder of an agricultural landscape powered by the wind. The mill is also called the Boreasmühle, though the sources do not explain where that name comes from. How old is the site? Although today's structure is almost two centuries old, a mill has stood here for much longer. The first mention of a mill at this location dates from 1318, which places it among the oldest mill sites in Germany. One source links the Riepenburger name to a knight, Hermann Ribe, said to have owned the mill in the 13th century. The 1828 building therefore replaced earlier mills on the same spot. A manorial mill and the 1880 sale Until it was sold in 1880, this was a manorial mill, leased to a miller by the bailiff of Bergedorf. Until 1863 a milling obligation applied: people from Bergedorf, Geesthacht and the Vierlande had to have their grain ground either here or at the Bergedorf water mill. In 1880 a local man, H. A. Busch, bought the mill from the City of Hamburg. Protection and the mill today The mill has been a listed monument since 1939. It is one of the few Hamburg mills whose grinding mechanism still works and whose sails turn regularly in the wind. Since March 1999 the association Riepenburger Mühle e.V. has worked to keep it in good condition. The mill serves as an educational site where visitors can learn about historical milling in the Vierlande region. Who will enjoy it? Technology and craft-history fans who want to see a working grain windmill. Cyclists and walkers exploring the Vierlande and Marschlande, where the mill is a distinctive landmark. Families and school groups interested in how grain was once ground. Photographers looking for a picturesque monument among fields and dikes. Frequently asked questions Where exactly is the Riepenburger Mühle? In the Kirchwerder district of Hamburg, at Kirchwerder Mühlendamm 75a. Is it the oldest windmill in Hamburg? It is described as the oldest and largest surviving grain windmill in the city; the present building dates from 1828. Since when has there been a mill here? The first mention of a mill at this site dates from 1318. Does the mill still work? Yes. It is among the few Hamburg mills with a functioning grinding mechanism, and its sails turn regularly in the wind. Who looks after the monument? Since 1999 the association Riepenburger Mühle e.V., and the building has been protected as a monument since 1939. What does "Boreas" mean here? The available sources give no explanation; they only use it as an alternative name for the mill.
-
Hammermühle Bautzen
Bautzen
Hammermühle Bautzen is a historic mill on the Spree river in Bautzen, Saxony, with origins going back to 1493. Today a family business produces oils and mustard here, and the works can be visited on a guided tour. How did the mill begin, and where does its name come from? The town of Bautzen had the complex built in 1493 as a wire mill. Water-powered equipment drew wire on drawing benches. In 1740 the works gained an iron hammer forge, and that hammer gave the place its name, "Hammermühle", or "hammer mill". The property then passed to an iron and hammer smith from Frohnau, who took it over in poor condition. In the 19th century water power was modernised and the site worked for a time as a hammer works. What does the mill do today? Over the centuries the site moved from metalworking to food production. It is now a grain mill, an oil mill and a mustard mill at once. The firm Heinke & Sohn runs it, now in the sixth generation of the same family. The range includes pressed oils, mustards and the traditional sealing earth "Lusatia", long associated with Upper Lusatia. Where is Hammermühle? The mill stands north of the old town, on the border with the Seidau district, beside the Spree. The historic centre of Bautzen with its towers and town walls is a few minutes away, so a visit combines easily with a stroll through the old town. The Bautzen Mustard Museum is a separate institution in the centre and is not part of the mill. What can you see and do here? A mill ensemble with preserved technical equipment, protected as a heritage monument. Guided tours showing how oils and mustard are made. Mustard workshops where participants create their own flavour. A shop with local products, handy for a regional souvenir. Why visit? Bautzen is Germany's best-known mustard town, and Hammermühle lets you see production in an authentic building more than five hundred years old. The story of the site shows how one spot on a river changed purpose: a medieval wire mill, then a hammer forge, and now an oil and mustard maker. It suits fans of technology, craft history and regional food, as well as families who enjoy hands-on activities. Frequently asked questions Since when has Hammermühle existed in Bautzen? Since 1493, when the town built a wire mill on the site. What is produced here? Oils, mustard and the sealing earth "Lusatia"; the mill also grinds grain. Can you tour the mill? Yes, the works offers guided tours and mustard workshops. Check hours and dates on the town or company website before you go. Is it the same as the Mustard Museum? No. The Mustard Museum is in the centre of Bautzen and operates separately. Is the site a listed monument? Yes, the mill ensemble and its technical equipment are under heritage protection.
-
Anderbecker Windmühle
Huy
Anderbecker Windmühle is a protected post mill in the village of Anderbeck, part of the municipality of Huy in Saxony-Anhalt. It stands on the south-eastern edge of the village, beside the road towards the hamlet of Wilhelmshall, and is listed as an architectural monument. What is the Anderbeck windmill? It is a wooden grain mill with four sails, built in the middle of the 19th century. In a post mill the whole body with its machinery turns on a single heavy post, so the miller can face the sails into the wind. Two of the sails originally carried louvred shutters, while the other two were covered with canvas. Today every sail is cloth-covered, giving the mill a uniform, traditional outline that is visible from afar across the fields of the Huy. The mill worked until the 1960s and then fell into decay. Restoration has been under way in stages since the 1990s, and conservation work, including work on the sails, has continued in recent years. What survives inside? The mill's greatest value is its complete technical equipment. The grinding stone set and the coarse-grinding set are still there, together with a roller mill and a hexagonal sifter for flour. There are also a husking machine, a grain cleaner called a trieur, a goods hoist and elevators for moving grain. An electric motor from the first half of the 20th century completes the set and allowed grinding on windless days. For anyone interested in the history of technology, it is a rare chance to see the full layout of a small village mill rather than just its shell. Who looks after the mill? The windmill is run by the association "Windmöhle un Backhus Anderbeck e.V.", whose name in Low German simply means windmill and bakehouse. In 1998 a bakehouse (Backhaus) was built next to the mill. It helps to fund the upkeep of the monument and keeps the place alive during local events instead of leaving it as a museum piece. A legend from the Huy A folk tale from the region is tied to a local hill. It tells of an elderly farmer who could no longer work all his fields and leased a plot on a rise to the village. The story comes from the collection "Neue Sagen aus dem Huy". It is a legend, not a historical source, but it conveys the atmosphere of the area well. How to plan a visit Anderbeck lies in gently rolling countryside at the foot of the Huy hills, north of the Harz and near Halberstadt. The mill is best admired from outside while strolling through the village or along the nearby field tracks. Check directly with the association about interior visits and events, as availability depends on volunteers. The mill combines well with a trip to other monuments in the region, including further windmills and old villages of the Huy. Frequently asked questions What type of windmill is it? A post mill: a wooden windmill whose entire working body turns on a central post. Is the mill a listed monument? Yes, it is registered as an architectural monument in Saxony-Anhalt. Is the machinery preserved? Yes, the complete milling equipment, from the grinding set to the hexagonal sifter, has survived. Who runs it? The association "Windmöhle un Backhus Anderbeck e.V.", which also operates the bakehouse by the mill.
-
Immanuel
Neufeld
Immanuel windmill in Neufeld is a historic Dutch-style mill in Dithmarschen, Schleswig-Holstein, that has served as a contemporary art gallery since it was moved here in 1983. It stands at Püttenweg 2 in Neufeld, in the Marner Neuenkoog area close to the North Sea coast. What kind of building is it? Immanuel is a Kellerholländer, a Dutch-type windmill whose body rises above a cellar level. It has four sails fitted with louvres (shutter sails), which let the miller adjust how strongly the wind drives the machinery. The cap is turned into the wind by a fantail, a small wheel at the back that replaced an older hand-operated tail pole in 1918. The mill is listed as a cultural monument in Schleswig-Holstein under object ID 3399. What is its history? The millwright Paul Jebens built the mill in the mid-19th century, originally as an earth-banked mill on the Sophiendeich in Marne. Shortly after it began working it received its shutter sails. In 1907 a paraffin engine was installed, so grinding no longer depended on wind alone. In 1936 a short circuit started a fire that destroyed the historic mill at its original site. The present structure comes from another spot in Marne: it stood on Königstraße and worked there until 1959, after which it fell into decay. Relocation and a new purpose In 1983 the sculptor Klaus Wiethoff had the windmill moved to Neufeld. After the move it was restored. The full milling equipment survives, along with an underground passage, the fantail and the shutter sails, so the technology of traditional milling is still easy to read. The plot where the mill stands today had lain unused for almost half a century. Why visit? Today the mill works as a gallery. An art gallery occupies the cellar, and the owner regularly stages exhibitions of contemporary art. It is an unusual pairing of historic technical heritage and modern work under one roof. For visitors exploring the Dithmarschen coast, it makes an interesting stop between polder landscapes and the region's other monuments. Against the flat, open marshland the mill's silhouette is visible from afar. Frequently asked questions Where exactly is Immanuel? At Püttenweg 2, 25724 Neufeld, in the Dithmarschen district of Schleswig-Holstein. Who built the mill? The millwright Paul Jebens built it in the 19th century in Marne. The present windmill was later moved to Neufeld. Is it a protected monument? Yes, it is listed as a cultural monument under object ID 3399. What is it used for today? It works as a gallery: an art gallery occupies the cellar, and exhibitions of contemporary art are held there. When was the mill relocated? In 1983, on the initiative of the sculptor Klaus Wiethoff, who had it restored after the move. Is the interior preserved? Yes, the complete equipment survives, including the underground passage, the fantail and the shutter sails. In short Immanuel combines the history of technology, the story of a relocated monument and contemporary art. For lovers of mills and for anyone interested in Dithmarschen culture, it is worth a short stop. The pairing of a 19th-century mill with a gallery inside it sets it apart from other monuments in the region.
-
Windmill in Linda
Neustadt an der Orla
Windmill in Linda is the Knapp-Mühle, a historic windmill in Linda, a district of Neustadt an der Orla in Thuringia, Germany. Today it houses a mill museum, a small arts stage and a sack museum, and visitors can stay overnight at the mill. What kind of windmill is it? It is a gallery Dutch windmill (German: Galerieholländer). This design has a tower with a gallery running around it at the level of the sails, so the miller could reach the sails and handle them safely. The mill is commonly named after the family that runs it today, hence Knapp-Mühle. In the region it is described as the only windmill of this kind in Thuringia. History of the mill A windmill has stood on this spot since 1813, when the first mill was built here. The present structure dates from 1867. A fire destroyed the earlier mill, and the new one was built as a gallery Dutch mill. For many decades it ground grain for local people. Work stopped in the 1960s, though sources give different dates, from around 1960 to 1965. In 1978 the mill was declared a technical monument. Three years later, in 1981, the Knapp family bought it. They restored it over the following years, and in the 1980s the mill took on a cultural role. Sources differ on whether the small stage opened in 1981 or in 1985. What can you see here? A mill museum in the windmill itself, showing how the mill once worked and how grain became flour. A sack museum on the former sack loft (Sackboden), where grain and flour used to be stored. A small arts stage (Kleinkunstbühne), which hosts cultural events. The Oberstübchen, a room in the upper part of the mill that can be booked for an overnight stay. In front of the mill there is also a motorhome parking area with three pitches. Where is it and how do you get there? The mill stands at Ortsstraße 20b in Linda, postcode 07819. Linda lies near Neustadt an der Orla in eastern Thuringia, in the Plothen pond district (Plothener Teichgebiet), a landscape of ponds known for cycling and walking routes. The mill fits well into a day trip around the area. Frequently asked questions Is the windmill in Linda still grinding grain? No. It stopped working as a commercial mill in the 1960s. Today it serves as a museum and cultural venue. When was the present building constructed? In 1867, after a fire destroyed the earlier mill from 1813. Can you stay overnight? Yes. The mill has the Oberstübchen room, and there is a motorhome parking area in front of the building. Who runs the mill? The Knapp family, who bought it in 1981 and restored it. Is it a listed monument? Yes. It has been a technical monument since 1978. Who will enjoy a visit? The mill appeals to fans of technical heritage, families curious about how grain was once milled, and cyclists or motorhome travellers crossing Thuringia. Before visiting, check the current opening hours on the mill's own website, since the museum is run by a family rather than a large institution.
-
Heinefelder Wassermühle
Wildeshausen
Heinefelder Wassermühle is a historic watermill in the hamlet of Heinefelde, part of the town of Wildeshausen in Lower Saxony. Today the building is a private home, but part of the old mill serves as a small museum and can be visited by prior arrangement. What should you know about this place? The mill sits in a rural setting on the edge of Wildeshausen, in the Wildeshauser Geest, a gently rolling glacial landscape. It is not a large attraction with a ticket office and fixed opening hours. It is a small, personal site for anyone interested in the history of technology and traditional crafts. The address is Heinefelde 2 A. What is the history of the mill? The earliest written record of a watermill at this spot dates from 1487 and relates to the sale of the mill together with its estate. In 1511 the estate passed to the church at Wardenburg and was split into two farmsteads. One of them was known as "De Möller ton Heinevelde", a name that shows how closely the place was tied to milling. Until 1832 even the owners of the mill farm were called millers. The present mill house was built in 1802. Over the following decades the building and its machinery were repeatedly modernised. Until about 1860 the drive worked on the surge principle, in which water held back above the mill fell onto the wheel in controlled batches. After that, the wooden mechanisms were replaced with metal ones, so water power could be used continuously, among other things to generate electricity. How did the mill survive? In time the site fell into disrepair and lay under rubble for many years. In 1994 Dagmar Schomburg and Antonius Wahlberg-Schomburg bought it and set about saving it. The water wheel was reconstructed in 2005, and since then part of the mill has been used as a small museum display. The ensemble is protected as a listed monument. Can you go inside? The building is lived in, so there is no ordinary visiting routine. Seeing the mill requires asking the owners in advance. It is worth planning ahead and respecting the residents' privacy. From outside you can admire the shape of the historic building among greenery, and photographers will find a quiet, picturesque scene. How can you combine a visit with other sights? Heinefelde lies close to Wildeshausen, a town with a long history, known for its monuments and nearby Stone Age archaeological sites. The mill fits well into a cycling trip around the surrounding Geest, where other watermills and windmills are scattered. That makes it easy to build a full-day route following the traces of old technology. Frequently asked questions Is Heinefelder Wassermühle open to visitors? Only by prior arrangement. The building is a private home, and the museum display is shown on request. When was the present building constructed? The mill house dates from 1802, while the first mention of a mill here goes back to 1487. When was the water wheel rebuilt? In 2005, after years of neglect and restoration work by the new owners. Is the mill a protected monument? Yes, the ensemble is under monument protection. Where exactly is the mill? In the hamlet of Heinefelde, at Heinefelde 2 A, within the town of Wildeshausen.
-
Windmühle Ursula Barlt
Barlt
Ursula Windmill in Barlt is a historic Dutch-style gallery windmill in the village of Barlt, in the Dithmarschen district of Schleswig-Holstein on Germany's North Sea side. Built in 1875, it is one of the best-known mills in the region and a regular stop on local sightseeing routes. What does the Ursula windmill look like? The mill is a Galerieholländer, a Dutch-type windmill with a gallery running around the body, from which the miller once handled the sails. On top sits a fantail (Windrose) that turns the cap and sails into the wind automatically. The sails are louvred (Jalousieflügel), and the current set dates from 1994. Inside are two pairs of millstones and an additional engine-driven set, so grinding is possible even when there is no wind. History of the mill A mill stood on this spot long before the current building. Its predecessor was a post mill (Bockmühle) that, according to one source, was already there in 1669. When the new mill went up in 1875, it replaced that older, seventeenth-century structure. The new windmill first stood on a raised mound known as the Mühlenberg. In 1923 it was lifted by three metres and placed on a base structure, which gave the sails better access to the wind. After that conversion it was for a time called "Dorothea". The name Ursula is said to come from one of the six daughters of Rudolf Lindemann, the last working miller in Dithmarschen. Why is it an important monument? In 1983 Ursula was entered in the monument register (Denkmalbuch) as the last Dutch mill on a base structure in Dithmarschen that was still capable of grinding. That is a notable distinction in a region that once had many such mills and has kept few of them. In 1999 the German Foundation for Monument Protection (Deutsche Stiftung Denkmalschutz) took part in the restoration, which helped keep the building in good condition. Visiting the windmill in Barlt The mill stands at Mühlenstraße 5 in Barlt and is easy to spot from the road. It is best admired from outside, in the open, flat Dithmarschen landscape, where its gallery and sails stand out sharply against the horizon. If you want to see the interior, check the current visiting arrangements with the local tourist information first, because access to the mill is described differently in different sources. Next to the mill is the ice cream parlour and cafe "Eis an der Mühle", a pleasant place for a treat after a walk around the windmill. According to the regional tourism portal, the season runs from Easter to October, Wednesday to Sunday, usually in the afternoon. Ursula is also one of the sites on the Dithmarscher Mühlen-Tour, the regional mill route, so you can combine it with visits to other historic mills nearby. It makes a good base for a bike or car trip through the villages and polders of Schleswig-Holstein's west coast. Frequently asked questions When was the Ursula windmill built? In 1875. It replaced an earlier post mill known from seventeenth-century sources. Where exactly is it? In Barlt, in the Dithmarschen district of Schleswig-Holstein, at Mühlenstraße 5, 25719 Barlt. Why is it called Ursula? The name comes from one of the daughters of Rudolf Lindemann, the last working miller in Dithmarschen. After the 1923 rebuild it had briefly been called "Dorothea". Is the windmill a listed monument? Yes. It was entered in the monument register in 1983 as the last grinding-capable Dutch mill on a base structure in Dithmarschen. Can I get something to eat nearby? Yes, the ice cream parlour "Eis an der Mühle" is right by the mill.
-
Wassermühle Hanerau
Hanerau-Hademarschen
Wassermühle Hanerau is a historic, fully working grain watermill in Hanerau-Hademarschen, in the Rendsburg-Eckernförde district of Schleswig-Holstein. It stands on the Hanerau stream at the edge of the village and is listed among the municipality's cultural monuments. The mill can still grind grain, and a dedicated mill association looks after it. What does the mill look like and how does it work? The drive is an overshot water wheel about three metres across. Water arrives from above, fills the buckets and turns the wheel by its own weight. The power is carried into the building, where an intact grinding set is in working order. That complete, functioning technology sets the site apart from many mills where only the shell survives. The present building dates from 1857. What is the history of the mill? Sources disagree on when the first mill was established here, with dates ranging across the 15th to 17th centuries. It was one of three "forced mills" (Zwangsmühlen) belonging to the Hanerau estate. Local people were obliged to grind their grain there rather than choose a competitor. This milling obligation ended in 1814 with the introduction of freedom of trade. The estate's other two mills are gone; this one survived. Since 1909 the property has belonged to the Pahl family. The mill worked commercially until the mid-1960s, after which the changing milling industry gradually ended its economic role. Who looks after it today? In 2012 the association for the preservation of the Hanerau watermill was founded. Ten mill enthusiasts attended the founding meeting in March. The aims were straightforward: maintain the building and its machinery, keep the mill running and show it to future generations. Since 1 January 2017 the mill has been leased to the association, which runs it day to day. When can you go inside? Since 1996 the mill has opened regularly on German Mill Day (Deutscher Mühlentag), held every year on Whit Monday. Visitors can then see the wheel and mechanism up close, often with association members who gladly explain a miller's work. Outside that day, check the mill's website for current dates. Frequently asked questions Does the mill really work? Yes, it has a functioning water wheel and grinding set. Who owns it? The Pahl family has owned it since 1909, and it has been leased to the association since 2017. What was a forced mill? One where the people of an estate had to grind their grain. The obligation was lifted in 1814. Can I visit? Yes, regularly on Mill Day and on other dates set by the association. Who is it for? It suits anyone interested in technology, traditional crafts and the industrial architecture of northern Germany. It is a good stop for families, because the principle of a water wheel is easy to grasp without any knowledge of mechanics. Combine the visit with a walk through Hanerau-Hademarschen and the nearby manor houses, or with a trip across the region between Rendsburg and the North Sea coast. Since volunteers run the site, opening hours are limited and depend on event dates, so plan ahead.
-
Mühle Friedemann Paschwitz
Doberschütz
Friedemann Tower Windmill in Paschwitz (Mühle Friedemann Paschwitz) is a historic tower windmill in Paschwitz, part of the municipality of Doberschütz in Saxony, Germany. It stands on a rise known as the Mühlenberg and has been a recognisable feature of the local landscape for well over a century. How did the Paschwitz windmill come about? The massive tower was built on the Mühlenberg in 1883. It had no wind rose, the device that turns a mill's cap and sails into the wind automatically. Millers therefore had to turn it by hand so the sails faced the wind. Running a mill like this took constant attention and plenty of experience. Who were the Friedemanns? The mill takes its name from a family of millers. In 1933 miller Ernst Friedemann bought it, and over the following decades he carried out extensive conversions in 1938, 1946 and 1965, adapting the mill to changing needs and technology. A turning point came in 1968, when storm damage hit the sails. From then on the mill ran on electric power alone. From 1975 the small milling business was run by Edgar Friedemann, described as the last commercial windmiller in the region. He worked until the end of 1997. Rebuilt with sails In 1991/92 Edgar Friedemann had the mill building reconstructed and fitted with sails again. That gave the windmill the classic silhouette that is visible from afar and that it keeps today. What to know before you visit Location: Paschwitz lies in the Doberschütz municipality in northern Saxony, close to the Dübener Heide nature area. Local tourism material calls Doberschütz the gateway to that landscape. Viewing from outside: The mill is easy to see from nearby roads and paths, so you can look at it and photograph it without going inside. Nearby sights: The municipality also lists the Witrowberg hill in Paschwitz and the village church in Battaune among its points of interest. All three fit into a single outing. By bike or on foot: The windmill appears in cycling and tourism listings for the region, which makes it a good stop on a day trip. Why stop here? The Friedemann windmill shows how an ordinary family milling business left its mark on regional history. A single mill's story here spans hand-turned sails, electric drive and finally a reconstruction. For fans of technical heritage, local history and photography, it is a quiet, rewarding destination not far from Leipzig. Frequently asked questions When was the Paschwitz windmill built? The tower was built in 1883 on the Mühlenberg hill. Did the mill grind grain until recently? The last commercial miller, Edgar Friedemann, worked there until the end of 1997. Since 1968 the mill had been driven by electricity rather than wind. Does the windmill have sails? Yes. The sails were damaged by a storm in 1968, and in 1991/92 the building was reconstructed and fitted with sails again. Where exactly is it? In Paschwitz, part of Doberschütz in Saxony, at roughly 51.46 N, 12.72 E.
-
Post Windmill Tiefensee
Bad Düben
Post Windmill Tiefensee (Bockwindmühle Sommerfeld) is a historic post mill in Tiefensee, a village that has belonged to the town of Bad Düben in northern Saxony since 1999. Today it works as a show mill and is a rewarding stop for anyone interested in technology history and traditional milling. What is a post mill? The post mill (German: Bockwindmühle) is the oldest and simplest type of windmill in Europe. The whole wooden body holding the milling machinery rests on a single sturdy vertical post and can rotate around it. The miller turns the entire structure into the wind with a long lever, so the sails always face the right direction. This design suits the flat lands of eastern Germany, where the wind blows with few obstacles. History of the mill in Tiefensee The mill was built in 1847, though not in Tiefensee: it originally stood on land belonging to Delitzsch. Around 1900 it was moved to its present site. Relocating post mills, whole or in parts, was a fairly common practice, because the timber construction made it possible. Over time the mill stopped depending on wind alone. In 1926 it began running with an external diesel engine, and in 1940 an electric motor was added. It ground and crushed grain until it was finally taken out of service in 1953. When the work stopped, the mill did not vanish from the landscape. Restoration and today Between 1992 and 1994 the building underwent a thorough reconstruction. The mill has been owned by the Sommerfeld family for generations, now in the fourth, which gives it its second name, Bockwindmühle Sommerfeld. The family runs it as a show mill. In 2021 it received new sails, which matters because the sails suffer most from wind and weather and need replacing from time to time. Who is it for? People interested in the history of technology and milling. Families with children who want to see how flour was once made. Cyclists and walkers exploring the area around Bad Düben, a spa town on the Mulde river. Photographers who like timber structures set against open countryside. Frequently asked questions Is this the same windmill as the one in central Bad Düben? No. In Bad Düben, by the former Obermühle, stands a different post mill that was moved from Glesien. The Tiefensee mill is a separate monument. When was the Tiefensee mill built? In 1847, near Delitzsch. It was moved to its current site around 1900. Does it still grind grain commercially? No. Commercial milling ended in 1953. It now operates as a show mill. Is the mill open as an attraction? Yes, the Sommerfeld family runs it as a show mill. Check visiting times on regional Nordsachsen mill websites before you go. Where is Tiefensee? Near Bad Düben in the Nordsachsen district. Since 1 January 1999 it has been part of the town of Bad Düben. In short The Tiefensee mill brings together several stories: a building that travelled from one site to another, a shift from wind power to diesel and electric motors, the end of milling in 1953, and a revival thanks to one family's persistence. It is a good reason to pause during a trip through eastern Germany and see a living piece of local history.
-
Windmühle Amanda
Düdenbüttel
Windmühle Amanda is a Dutch-style windmill in Grefenmoor, part of the municipality of Düdenbüttel in the Stade district of Lower Saxony. With its octagonal body and rotating cap, it is one of the best-known mills of the region, and today it also serves as a picturesque wedding venue. What does the Amanda windmill look like? This is a Dutch-type mill standing on a solid base, with an octagonal body and a turning cap that lets the sails face the wind. The structure is about 25 metres tall in total. Inside there are four levels, and when the mill was in working order it contained two pairs of millstones and a grain-cleaning unit. It rises above flat, open countryside, so it is visible from far away. What is the history of the mill? The mill was built in 1853 and started operating in the autumn of that year. The builder was Hinrich Tamke of Estorf. Lightning damaged it in 1874 and again in 1896, and each time it was rebuilt; its present form dates from the 1896 reconstruction. This is why some sources give 1853 and others 1896 as the year of the current mill. In 1893 the mill passed to Meta and Robert Schultz from Bützfleth. An electric motor was installed in 1945, and during the 1950s it was used only for the owners' own needs before gradually falling into decline. The turning point came in 1993, when Hans Rauterberg bought it. A local mill and heritage association (Mühlen- und Heimatverein) soon formed, and Gert Saborowski brought the restoration to completion. The overall renovation cost roughly one million Deutsche Marks. During the work the tower, which had developed a strong lean, was straightened again. Why is it called Amanda? The mill was christened Amanda in 2001. According to local sources, the name refers to the wife of a former miller. What can you do here today? The mill is looked after by the local association and is protected as a technical monument. Since 2012 it has served as a branch registry office of the Oldendorf-Himmelpforten municipality, so couples can marry inside its historic rooms. The mill can also be hired for events. It is a stop on the Niedersächsische Mühlenstraße, a themed route of windmills and watermills across Lower Saxony, and lies near cycling routes in the Altes Land and Lower Elbe region. Local media have also reported on an annual mill festival with activities for visitors. How do I get there and plan a visit? Grefenmoor lies close to the B 73 federal road between Stade and Cuxhaven. The windmill makes a good stop on a bike tour of the area. Opening for tours and event dates are not fixed, so before travelling it is worth contacting the association that runs the mill via muehle-grefenmoor.de. Frequently asked questions Can you go inside? The interior is sometimes open during events, weddings or private hire; since dates vary, ask the organisers beforehand. Does the mill still grind grain? No. Commercial milling ended in the mid-20th century, and today the mill is a heritage monument, a wedding venue and a community meeting point. When was the windmill built? The original structure dates from 1853, and its current form comes from the rebuilding after the 1896 damage. Why is it named Amanda? The name was given in 2001 in honour of a former miller's wife.
-
Wehbers Mühle
Himmelpforten
Wehbers Mühle is a listed mill complex in Himmelpforten, in the Stade district of Lower Saxony. It consists of a four-story gallery windmill of the Dutch type and a historic water mill. Both are regarded as landmarks of the village and are protected as monuments. What can you see here? The windmill is what you notice first. It is a four-story "Galerieholländer", a Dutch-style windmill with a gallery running around the tower, from which the miller once handled the sails. Next to it, at the weir, stands the water mill. Together they form an unusual pairing: two sources of power within one milling estate. Today the complex is a living place rather than a museum piece. A garden and DIY market operates here, along with a restaurant set in the mill tower. That makes Wehbers Mühle a popular short excursion, with the chance to eat in a historic interior. What is the history of the mill? The origins reach back to the Middle Ages. The water mill descends from an older "water mill on the beck" that belonged to the monastery of Himmelpforten, founded in 1250. In 1653 Michael Wehber, the monastery bailiff (Klostervogt), received the mill as a fief. Since then it has remained in the hands of the same family, which has run it through many generations. Sources differ on the exact generation count, so treat it as approximate. The water mill was rebuilt in 1739 at its present spot on the weir. The windmill was built in 1871 because water shortages hampered the water mill. A steam engine was added in 1907 and a diesel motor in 1923, which made the operation independent of wind and water. In 1937 a storm tore off the sails and the wind rose. Milling ended in 1971, when falling flour prices made production unprofitable. The windmill was restored in 1986. Why stop here? It is one of the most recognisable monuments of Himmelpforten, firmly part of the local landscape. You can see a windmill and a water mill side by side, showing how milling technology developed in the region. The site lies on the Niedersächsische Mühlenstraße, a themed route of Lower Saxony mills, so it fits well into a cycling or driving trip. On site you can eat in the restaurant in the mill tower and shop at the garden market. Frequently asked questions Is Wehbers Mühle a listed monument? Yes. Both the windmill and the water mill are protected as monuments. Does the mill still grind grain? No. Milling stopped in 1971 because it was no longer profitable. Today the buildings serve retail and catering. When was the windmill built? In 1871, to supplement the water mill during periods of water shortage. Can you eat at the mill? Yes, there is a restaurant in the mill tower. Check opening hours on the official website before visiting. How do you get there? Himmelpforten lies in the Stade district, near the town of Stade and the lower Elbe. The mill is in the village itself and makes a good stop on cycling routes and the mill road. In short Wehbers Mühle combines more than three centuries of family milling tradition with a complex that welcomes visitors today. If you are travelling around Stade or along Lower Saxony's mill road, it is a good place for a short break: you can see two different kinds of mill, learn their story and have a bite in a historic tower.
-
Gott mit uns
Eddelak
The "Gott mit uns" windmill in Eddelak is a historic Dutch-style windmill in Dithmarschen, in Schleswig-Holstein. For well over a century and a half it has shaped the skyline of the village, and its name, German for "God with us", has belonged to it from the start. Today a local mill association looks after it, and couples can even marry inside. What kind of mill is it? The structure is a Zwickstellholländer, a Dutch-type tower mill with a gallery. The wooden gallery runs around the body of the mill, and from it the miller worked the tail, the sails and the brake. That let him turn the sails into the wind and stop them without climbing onto the cap. The body has an octagonal plan, easy to recognise from the street. What is the history of the Eddelak mill? The story begins in 1802. Christian Harms, half-brother of the theologian Claus Harms, moved a stamp mill from Meldorf and rebuilt it in Eddelak as a grain mill. That first mill worked until 1865. The present windmill went up that year, reusing some parts of its predecessor. It was built by the millwright Hans Suhr from Krumstedt. The building's life was not always calm. Around 1896 a fire broke out because the sails were turning backwards, but it was put out in time. In 1908 a petrol engine was added as auxiliary power, so grinding could continue on calm days. In 1934 a storage room was built onto three sides of the octagon, which made the gallery unnecessary for operating the sails. Wind operation ended in 1976. A storm damaged the wind rose, the mechanism that turns the cap into the wind, and in January that year the miller Albert Haalck stopped using wind power and did not rebuild it. The mill deteriorated for years until a thorough restoration began in 1988. Since then the Eddelak mill association (Mühlenverein) has maintained and used it. What does "Gott mit uns" mean? The phrase comes from the Gospel of Matthew (1:23) and is known in Germany as a motto. Among other uses it was a Prussian motto from the 18th century. For the mill, though, the name is local and religious in character: it was given to the windmill, and the mill's image also appears in the coat of arms of the municipality of Eddelak. Keep in mind that in other historical contexts the phrase carries very different associations. Can you get married here? Yes. The mill is a branch office of the Burg-St. Michaelisdonn registry office, so civil ceremonies take place inside. Couples choose it for the atmosphere of the historic timber structure and the view over the Dithmarschen landscape. Ceremonies are arranged in advance with the registry office. Can you visit the mill? Visits are possible by prior arrangement with the people who look after it. No fixed opening hours are published, so contact the association before you travel. A good occasion to visit is German Mill Day, held on Easter or Whit Monday, when many windmills across the country open to guests. In 2026 it fell on Whit Monday, 25 May, and the Eddelak mill welcomed visitors then too. How to get there The mill stands on Süderstraße in Eddelak, a small village in the Dithmarschen district, a few kilometres from the mouth of the Elbe. The surroundings are flat and well suited to cycling. The windmill is marked as a stop on cycle routes, so it is easy to combine with a ride through the marshland of the lower Elbe. Frequently asked questions Does the mill still grind grain? No. Wind stopped driving it in 1976, and today it serves as a monument, a wedding venue and a destination for day trips. Who built the current windmill? The millwright Hans Suhr from Krumstedt, in 1865, reusing parts of the older mill. What is a Zwickstellholländer? A Dutch-type windmill with a wooden gallery from which the sails and brake were operated. Do I need to book a visit? Yes, visits are by prior arrangement with the caretakers. Can a civil wedding take place inside? Yes, because the mill is a branch of the local registry office.
-
Hammerschmiede
The Hammerschmiede in Lahr-Reichenbach is a historic water-powered forge on the Schutter river, in the Reichenbach district of Lahr in the Black Forest. Toolmaking at this site goes back to around 1730. Today the building is a protected cultural monument and works as a living museum of the trade. What is a hammer mill? A hammer mill (German: Hammerschmiede or Eisenhammer) was a craft workshop from the pre-industrial era. It produced wrought iron as semi-finished stock, along with everyday goods made from it. The defining feature was a tail hammer driven by water power. A shaft fitted with radial cams pressed down on the end of the hammer handle at regular intervals, lifting the head. As it rose and fell, the head moved along a circular arc. The surface the hammer struck was steel-faced so that it would last a long time. What can you see here? Three iron hammers driven by a water wheel still operate in Reichenbach. Of the two original forges, one is still in use. A smith at the anvil demonstrates old forging techniques, so you can see and hear how work went before steam and electric machinery. Next to the forge stands a former grinding shop, also water-powered. It now serves as a club house and event room. The top floor holds a small local history museum that adds to the story of life in the Schutter valley. A bee garden was added at the site in 2007. Who looked after it The city of Lahr bought the buildings in 1978. Since 1997 they have been maintained by the Schwarzwaldverein Reichenbach, a local hiking and outdoors association that keeps the forge running and offers demonstrations. That makes it a working workshop rather than a static exhibit. Reichenbach also holds a festival of lights, during which the forge is sometimes atmospherically illuminated. Who will enjoy it people interested in technology and the history of crafts, families with children who like watching real work with fire and water, hikers in the Black Forest looking for a stop with local character, photographers who appreciate a water wheel, timber structures and the feel of an old workshop. Frequently asked questions Can I take a guided tour? Yes, guided tours are offered. It is best to confirm dates and times with the Schwarzwaldverein Reichenbach before you go. Do the hammers really work? Yes. Three hammers driven by the water wheel are operational, and a smith demonstrates forging at the anvil. Is this the same Hammerschmiede as the district of Augsburg? No. Augsburg has a district called Hammerschmiede, but the place described here is the historic forge in Lahr-Reichenbach in Baden-Württemberg. What else is in the building? A former grinding shop with a club room, a local history museum on the top floor, and a bee garden. How much time should I plan? About an hour is usually enough for the forge, a smithing demonstration and a look at the museum, a little longer with a guided tour.
-
Rethem windmill
Rethem (Aller)
Rethem windmill is a historic post mill (German: Bockwindmühle) standing in the Londypark beside the River Aller in Lower Saxony. It counts among the oldest windmills of its kind in the state and serves as the landmark of the small town of Rethem (Aller). Where is the Rethem windmill? The mill sits in Londypark, a green area close to the Aller, in the town of Rethem (Aller). The town belongs to the Heidekreis district, in the Aller and Leine valley on the edge of the Lüneburg Heath. It is a quiet area, popular with cyclists and walkers exploring the heathland. The coordinates are roughly 52.78 N, 9.39 E. What is a post mill? The post mill is the oldest type of European windmill. The whole wooden body, with the milling machinery inside, rests on a single vertical post and can rotate around it. This allows the miller to turn the sails to face the wind. The structure is entirely timber, and a staircase fixed to the back gives access to the interior and doubles as a lever for turning the mill. History of the mill The mill was built in the late 16th century, in 1594 (some sources say 1593), in Frankenfeld, about a kilometre from the village. The builder is said to have been Arndt von Honstedt, the local estate owner. For generations it ground grain, and its age places it among the oldest surviving post mills in Lower Saxony. In the mid-20th century the district authority acquired it and gave it to the town to mark Rethem's 600th anniversary. Rethem received its town rights in 1353, which is why the jubilee fell in the 1950s. The mill was taken apart and rebuilt in Londypark. Sources give different dates for the move, either 1953 or 1955. In 2015 it underwent a complete restoration. What else is there to know about Rethem? The town itself has a long history. Rethem Castle was founded in the 13th century and first mentioned in writing in 1311. Today the windmill is one of the main sights visitors combine with a walk through Londypark and along the Aller. Can you visit the mill? According to local tourism websites the mill is fully operational, and guided visits are offered in season. Details such as dates and admission rules are best checked on the Lüneburger Heide tourism pages or at the local tourist office before you go. The mill is also part of a themed route through the Aller and Leine valley. Frequently asked questions How old is the Rethem windmill? It was built in 1594 (1593 according to some sources), so it is more than 400 years old. How did the mill end up in Londypark? It was built in Frankenfeld and moved to Rethem in the 1950s, when the town celebrated its 600th anniversary. Has the mill been restored? Yes, it was fully restored in 2015. What is a post mill? It is a windmill whose entire wooden body turns on a central post so the sails can face the wind. Is Rethem worth a visit? It is a small, calm town with a notable history in the scenic Aller valley, and works well as a short stop on a trip through the Lüneburg Heath.
-
Sundwiger Mühle
Hemer
Sundwiger Mühle in Hemer-Sundwig is the last water mill still in operation in the Märkischer Kreis district, in the northern Sauerland of North Rhine-Westphalia. It has belonged to the Alberts family for generations and still grinds grain, with a farm shop selling flour and bread. Why visit Sundwiger Mühle? This is a working piece of industrial heritage rather than a museum display. The mill runs as a family business, so alongside the historic equipment you see everyday work. For anyone interested in the industrial culture of the Sauerland, it is one of the most rewarding stops around Hemer. What is the history of the mill? The Sundwig property has been in the hands of the Alberts family since 1726. It began as a farm with a nail smithy and a bakery, and milling joined these activities in the 19th century. The present mill building went up between 1865 and 1868 and was built by Johannes Peter Alberts. Sources differ on the dates of the older farm buildings, so for the earliest chapters of the story it is worth asking on site. Until 1921, bread was baked in a wood-fired oven in the cellar. The tradition returned in 2004, and wood-fired bread is again on sale. How does the mill work? In the past an overshot water wheel drove the machinery. Today the mill runs on a water turbine on the Sundwiger Bach stream, backed up by an electric motor when the water runs low. An original goods lift from the time of construction, which carried flour sacks between floors, is still in use. The mill, the residential house and the farm buildings are protected as listed monuments. What can you buy here? The shop at the mill sells products made from local grain: several kinds of flour, wood-fired bread and other regional goods. It is a practical souvenir from the Sauerland. How can you combine a visit with a walk? Sundwig lies in a valley crossed by walking trails. Nearby is the Sundwiger Schätze geological trail of the Geopark Ruhr, which introduces the rocks and former industry of the area. A visit to the mill fits easily into a few hours of exploring Hemer. Frequently asked questions Is the mill really still working? Yes, it is the last operating water mill in the Märkischer Kreis district. Can I buy bread here? Yes, there is a shop at the farm, and bread has been baked in a wood-fired oven since 2004. What powers the mill today? A water turbine on the Sundwiger Bach, supported by an electric motor at low water levels. When was the current building constructed? Between 1865 and 1868. Where is the mill? In the Sundwig district of Hemer, in the northern Sauerland. Is the surrounding area worth exploring? Yes, walking trails and the Geopark Ruhr geological trail run nearby, so a longer walk is easy to plan.
Earn badges for the places you visit
Download NextOnTrip, discover new places and check off your trails.